How Much Does a Laser Engraver Cost in Canada? (2026 Guide)

It’s the first question most people ask, and the honest answer is a range that depends on what you need. This guide explains where the money goes, so you can compare quotes properly.

The short version: professional Epilog laser systems from Synergy start just under $15,000 CAD. From there, the price rises with laser type, bed size, wattage and options. For an exact figure, ask us for a quote on the configuration you need.

What drives the price

1. Laser type

• CO₂ is the most common type, for wood, acrylic, plastics, leatherette, glass and stone. It’s the usual starting point.
• Fiber is for marking bare metal. A fiber flatbed or a dedicated marking system is priced differently from a CO₂ machine of the same size.
• Galvo systems such as the Epilog Fusion Galvo G100 mark very fast within a small field. They’re a different class of machine from a flatbed.
• Dual-source machines, such as the Epilog Fusion Pro with CO₂ plus fiber, cost more than a single-source machine but can replace two.

Not sure which you need? Read CO₂ vs fiber laser.

2. Bed size

A larger work area means a larger, more expensive machine. Epilog’s range runs from the Fusion Ascent 12 (24″ × 12″) up to the Fusion Pro 48 (48″ × 36″). Kern’s large-format OptiFlex beds run from 52″ × 50″ to 86″ × 144″ and sit in a different price class. Buy for your largest regular job, not the one-off.

3. Wattage

Within a model, higher CO₂ wattage costs more. It cuts thicker material faster, but if you mostly engrave you may not need it. See Fusion Pro vs Fusion Ascent for the wattage options on each model.

4. Model family and speed

The Epilog Fusion Pro engraves faster (165 IPS) than the Fusion Ascent (120 IPS), takes taller parts, and offers more power and dual-source options. If the laser will run all day, the time saved can justify the difference. If it won’t, the Ascent is the better value.

5. Options and accessories

Common add-ons include:

• a rotary attachment for tumblers, glasses and other cylindrical items,
• cutting tables such as a vector grid or pin table,
• air assist and an air compressor for cutting,
• on the Fusion Ascent, the pass-through conversion kit for material up to 2″ thick (it changes the laser to Class 4).

6. Fume extraction

Every laser needs its fumes removed, either ducted outdoors or through a filter unit. A filter unit such as a Canadian-made FiltraBox costs more up front than a blower, but it needs no outside vent and lets you put the laser in an office, classroom or retail space. Include it in your budget from the start.

7. Freight and site work

Desktop and mid-size machines ship on a pallet. Large-format systems may need rigging and more space. Any electrical work comes on top. Epilog electrical requirements vary by model and wattage; confirm the supply and receptacle before ordering. Large Kern systems run on 230V, single or three phase, and some can be ordered for 415V or 480V three phase. Compressed air or assist gas is only needed for metal cutting.

8. Training, setup and service

Training is included with every new laser. Your quote spells out the details. Our service team, parts stock and support portal are in Canada for the life of the machine. When you compare quotes, check what each one includes.

Total cost of ownership

The purchase price is the biggest number, but not the only one. Plan for:

• Consumables: lenses, mirrors and other wear parts over the life of the machine.
• Filters: extractor filters need replacing. How often depends on the materials you run and how many hours.
• Electricity: a laser and its extractor draw power while they run. Your utility rate and your hours set the cost.
• Maintenance: routine cleaning by your operator, plus periodic preventive maintenance.
• Materials: sheet stock, blanks and marking compounds, which you price into your jobs.

Buying in Canada vs cross-border

A US price list can look cheaper at first. Before comparing, add up what a cross-border purchase can involve: exchange on US dollars, customs brokerage, any duties and taxes, cross-border freight, and getting warranty work done from another country.

Synergy is Canada’s exclusive Epilog dealer. When you buy from us:

• your quote is in Canadian dollars,
• we handle bringing the machine into Canada and shipping it to you,
• warranty support, parts and service come from a Canadian team in Delta, BC and Mississauga, ON,
• you have a local partner for training, settings help and repairs.

Getting an accurate number

The fastest way to an exact price is to tell us what you want to make. Try the Product Finder for a recommendation, then request a quote or book a demo at our Delta or Mississauga showroom (by appointment). Bring your own materials and we’ll run them.